Virtual Audio Cable to program do przesyłania strumieni audio pomiędzy aplikacjami. Opisywane narzędzie działa na zasadzie wirtualnego kabla pozwalającego na przesłanie dźwięku z jednego programu do drugiego. Virtual Audio Cable działa z niemal każdą aplikacją i jest kompatybilny z prawie wszystkimi kartami dźwiękowymi. Transfer strumieni audio wykonywany jest cyfrowo, a więc w bezstratnej jakości. Virtual Audio Cable może okazać się przydatny nie tylko osobom, które zajmują się tworzeniem muzyki, ale także zwykłym użytkownikom szukającym narzędzia np. do nagrywania rozmów prowadzonych za pośrednictwem komunikatorów internetowych.

----------

[ENG]

Virtual Audio Cable is a multimedia driver designed to connect one or more audio applications in order to transfer audio streams between them. This software introduces the 'virtual cables', which refer to a set of virtual audio devices containing input and output ports. Practically, the input port records the audio signal (for example, from a music player) and sends it to the destination program (such as a sound processor or analyzer) using the output port.

Features
- Local (console) session only (does not work via Remote Desktop or Terminal Services).
- Windows 5.x, 6.x and 10.x platforms (32-bit and 64-bit).
- Up to 256 virtual cable devices (some systems limit number of MME devices).
- 1..20 milliseconds per interrupt/event.
- 1..100 pin instances.
- Almost any of fixed point PCM audio formats (1000..384000 samples per second, 8..32 bits per sample, 1..8 channels). Floating point formats are not supported.
- Almost no sound latency with maximal interrupt/event frequency.
- RTAudio support with notification events, clock and position registers. Clock registers are bound to Virtual Cables so all streams in each cable are coherent.
- Unlimited number of Kernel Streaming clients connected to each port.
- Signal mixing (with saturation) between output port clients.
- PCM format conversion (sampling rate, bits per sample, number of channels).
- Volume control features (both attenuation and boost).
Channel scattering/gathering mode.
- Watermark control technique to improve stream stability with unstable applications.
- Stream buffering technique to partially compensate bad application buffering algorithms.
- Control Panel application to configure cables and watch their state.
- Audio Repeater application that transfers from any recording to any playback device.

Version 4.50 (30.12.17)
- Fixed a bug caused Control Panel crash if VAC driver cannot be restarted.
- Split monolithic cable KS filter into two separate render/capture filters.
- Added WaveRT (RTAudio) and WaveCyclic port/miniport interface support.
- Removed 16-cable limitation from the default INF file.
- Met Device Guard requirements.
- Signed with EV certificate to allow loading by Win10 in Secure Boot mode.
- Added load/save configuration features to Audio Repeater.
- Added actual sampling rate display to Audio Repeater.
- Added stream's actual sampling rate and run time display to VAC Control Panel.
- API: replaced CreationTime field in CableInfo with LifeTime to prevent calculation errors.

----------

strona producenta: software.muzychenko.net/
system operacyjny: Windows XP/Vista/7/8/8.1/10 (32bit - 64bit)

----------

- otwórz folder "Setup"
- w zależności od systemu operacyjnego uruchom plik "setup.exe" lub "setup64.exe"
- po instalacji uruchom program
- wersja zarejestrowana (Retail, thx. xanax)

----------

Win 10 64bit - screen po instalacji:
http://s9.postimg.org/etetev37j/image.png
http://s9.postimg.org/gxz6fyk9r/image.png
http://s9.postimg.org/r81lf7hv3/image.png